bitumode qatar


App modified bitumen plastomeric waterproofing membrane reinforced with non-woven polyester

Produced by Bitumode Qatar Waterproofing Factory, Bitumode is a line of polymer-modified bitumen waterproofing membrane of the highest quality. Bitumode is modified by APP and APAO, thus guaranteeing superior performance under various conditions.

BITUMODE P is reinforced with of non-woven polyester which provides high mechanical properties and dimensional stability.


BITUMODE — P APP 180 is a general purpose membrane, can be applied virtually anywhere where torch applied modified bitumen membranes subject to light to moderate mechanical stresses are specified and good cold flexibility features are required. BITUMODE — P APP 200 and APP 250 are suitable for heavy duty applications such as bridge decks and areas subject to heavy movements and stresses.

BITUMODE - P can be applied in:

  • Single layer roofing system for advanced use.
  • Double layer system for basements.
  • Double layer roofing system combined with BITUMODE—G fiberglass reinforced.
  • Toilets and wet area inside buildings.
  • Retaining walls.
  • Under raft foundations.

BITUMODE P with Mineral Slated Finish is recommended for exposed roofing system (Unprotected) for N.-accessible roofs or roofs subject to low traffic conditions.

Quality Control

Biturnode Qatar Waterproofing Factory is ISO 9001 certified. It applies a stringent quality control system utilizing its in-house laboratory. Occasional samples are analyzed by independent laboratories to ensure continued adherence to the highest standards (ASTM, EN,etc.).
Each roll of Bitumode is individually coded with a label containing all necessary information about the roll. This is intended to ensure traceability in accordance with ISO control standards.

Product Range

Standard thicknesses available include 3mm, 4mm and 5mm. Some types could be available by weight, such as 3kg/m2 , 4kg/m2, and 5kg/m2 Bottom surface finish is normally Polyethylene Film (PE).

Upper surface finish choices include:

  • Polyethylene Film (PE)
  • Fine Sand (S)
  • Mineral Slated Grey (GY)
  • Mineral Slated Green (GRN)
  • Mineral Slated White (WT)
  • Mineral Slated Red (RD)

The nominal length of each roll is 10 meters and the nominal width is one meter. Special specifications can be designed based on client's needs.

bitumode qatar


BITUMODE P has been designed with special regard to providing clients with an excellent and versatile product.
Advantages of BITUMODE-P includes:

  • Easy to apply (by torch)
  • Highly mechanical properties
  • Absolute impermeability to water
  • Flexibility at low temperature
  • Excellent high temperature performance
  • Excellent adhesion on any surface
  • High dimensional stability
  • Environmentally friendly
  • Resistant to soil chemicals and salts up to certain limits