bitumode qatar

Quality

The factory is equipped with Quality Control laboratory with the most advanced testing equipment up to the international standard EN ,ASTM and UEA etc.

1 Florescence Microscope

This is the most advanced fluorescence microscope with video analytical view ,showing and comparing the hornogeneous phase inversion between Bitumen and Polymer according to the formulation know-how and confirm the properties of the mixture before starting the production.

2 Slates adhesion tester

for the slates finished product we have to be sure of the highest degree of adhesion between natural colored slates and the membrane surface and this device measuring this criteria to permit the protec-tive layer to be within the international standard values.

3 Universal computerized tensile testing machine

For the civil and building condition we need to choose mernbrane with high mechanical properties , accordingly we depends on the universal tensile testing machine can perform the following tests ( tensile strength , Elongation , Tear Strength , adhesion strength to concrete ,peel strength ) comparing and analyze the results by computer system.

4 Water impermeability tester

This tester perform the required high pressure of water to the test sarnples to insure 100 % impermeability of the product

5 Softening point tester with computer control

This is the cornputerized Ring and Ball tester measuring the Softening point of the bitumen polymer cornpound to insure high quality of the final product .

6 Penetration tester

It is important analytical device to measure the penetration of the compound which reflecting the compound behavior.

7 Heat stability tester

In the hot climate area of application you need high resistance to temperature and heat stability and that is measured by rotating analytical heat condition device.

8 UV ageing tester (computerized Ageing Tester)

This is very important device with very high computerize technology which subject the test samples to all the weathering condition like U.V. radiation Raining ,Heating Cooling and by computer correlation you can predict the age of the membrane after installation without any failure.

9 Impact tester

Measuring the resistance to impact of dynamic load on the membrane during application of after final testing to insure resistance to any of the site condition could affect the waterproofing system Quality.